Author	[Modern View]
jbp 12-25-2012 08:57:33 64.57.160.123 Report to Moderator	Where do you find replacement valves and guides? I have a 22-36 setting in the shed needing both valves and guides along with a usable cylinder sleeve. Mine is a sawmill tractor so the drive line should be in good condition. Joe [Reply]   [No Email]
jbp 12-27-2012 07:03:13 64.57.160.197 Report to Moderator	Re: more rusty iron... in reply to jbp, 12-25-2012 08:57:33   Nebraska Kirk, I am interested in the used 22-36 sleeve you have. I will wait to hear from you on price, payment and shipping. I would have gotten back to you sooner but my computer was down yesterday. I am located in nw Ky. Thanks, Joe   [Reply]  [No Email]
Nebraska Kirk 12-25-2012 16:20:02 207.91.4.159 Report to Moderator	Re: more rusty iron... in reply to jbp, 12-25-2012 08:57:33   jbp said: (quoted from post at 10:57:33 12/25/12) Where do you find replacement valves and guides? I have a 22-36 setting in the shed needing both valves and guides along with a usable cylinder sleeve. Mine is a sawmill tractor so the drive line should be in good condition. Joe[/quote:aa39b2608c] You can get new valves and guides from Rice Equipment Inc. http://riceequipmentinc.com/ The Fordson House www.thefordsonhouse.com Parts of the Past Inc 785-749-5231 I think I can help you out with a good used sleeve. I have a 22-36 engine sitting in the shed with 3 good sleeves. PS The thresher is a 22 inch McCormick Deering heavyhaulertoo said: (quoted from post at 14:06:48 12/25/12) I bet it's got ice in the rearend in the winter,ha They sure do! [quote:aa39b2608c="Badger08"](quoted from post at 10:36:22 12/25/12) Neat to see! I would love to have those to slab weights off that 460 though, what part of NE are you in? I am in the southeastern corner of the State, but the pictures were taken at the previous owner's place in central Missouri and everything you see in the background belongs to him. This post was edited by Nebraska Kirk at 16:29:32 12/25/12 2 times.   [Reply]  [No Email]