|
| |
| Farmall & IHC Tractors Discussion Forum |
Topic: clutch release fork return spring
[Return to Forum]
| Author |
[Modern View]
|
| Tuckermac
12-21-2012 07:51:56
68.118.2.5
|
 My clutch release fork spring is missing, it fell out when I removed the hand hole cover. Can I replace it from underneath without splitting? The clutch pedal does not rest against the platform now. I have thought of making a spring of some sort to simply hold the pedal back, is this an option? Sorry to the correct police for two questions in one post.
|
|
|
|
| pete 23
12-21-2012 11:56:03
74.32.238.2
|
|
Re: clutch release fork return spring in reply to Tuckermac, 12-21-2012 07:51:56
|
|
| You always have to unhook them and rehook from under neath when doing a clutch job. I clamp a good vise grip on and go to it. It was a lot easier 50 years ago than the last one I did.
|
|
|
| j hakenwerth
12-21-2012 09:36:30
207.119.225.177
|
|
Re: clutch release fork return spring in reply to Tuckermac, 12-21-2012 07:51:56
|
|
| That clutch spring is very strong, it took me and two boys to get it on.
|
|
|
| Dalrymple
12-21-2012 11:31:38
65.13.230.104
|
|
Re: clutch release fork return spring in reply to j hakenwerth, 12-21-2012 09:36:30
|
|
| Quoting Removed, click Modern View to see
Did y'all do that from underneath? Must have been crowded.
|
|
|
| Zachary Hoyt
12-21-2012 09:03:23
173.84.189.49
|
|
Re: clutch release fork return spring in reply to Tuckermac, 12-21-2012 07:51:56
|
|
| I think I have a used spring if you are interested.
Zach
|
|
|
| pete_5959
12-21-2012 08:42:13
184.4.13.36
|
|
Re: clutch release fork return spring in reply to Tuckermac, 12-21-2012 07:51:56
|
|
| The spring part number is 4944da available from your friendly Case IH dealer. You will be able to replace from underneath. To say the spring is stout is an understatemnet considering the mounting points. A few good cuss words and one last push is all it took for me.......
|
|
|
| pete_5959
12-21-2012 08:23:57
184.4.13.36
|
|
Re: clutch release fork return spring in reply to Tuckermac, 12-21-2012 07:51:56
|
|
| What model? I just installed a new spring on my SM.
|
|
|
| Tuckermac
12-21-2012 08:28:39
68.118.2.5
|
|
Re: clutch release fork return spring in reply to pete_5959, 12-21-2012 08:23:57
|
|
[Options]
[Printer Friendly]
[Return to Forum]
[Add a Reply]
| Same-Day Shipping! Most of our stocked parts ship the same day you order (M-F). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a Company you can trust and have generous return policies! Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ More Info ] |
Home
| Forums
Copyright © 1997-2013 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor Headquarters |
About this site - Yesterday's Tractors is your one-stop source for antique tractors. If you are interested in older tractors you've come to the right place! Join more than 275,000 other classic tractor enthusiasts from all over the globe. We have many resources for antique tractor enthusiasts available including photos, classified ads, more than 24 tractor discussion forums, a show guide, values, specs and much more. Bookmark this site and come back often. Thanks for stopping by! Feel free to use our feedback form to send us your comments, suggestions and ideas.
|
|
|
