(800) 853-2651
SHOP NOW

SM PTO parts

D

Dean Olson

Well-known Member
This is the broken PTO part on a 52 SM. I got on the CNH website and it looks like I'm missing some linkage??? I couldn't tell if parts pictured were internal or external.

Any body have a picture of their SM PTO they can post?
a92992.jpg
 
You are not missing ANYTHING! Where the arm broke off the shaft is a common issue. You could take it apart and repair what you have easily.

I have extra PTO parts,if you need some,but you can repair what you have there easily. (I did mine)You need to tear it down BEFORE re welding it.
 
Thanks a bunch!

If you look closely you'll see that the previous owner welded busted one in place. The top half of the seal is burned off.

Please email me a pic & price of that part as I'm inclined to replace it as the old one has been cobbled up once already.
 
It"s really not hard to re-weld it. You can do a good job with it all apart. I"ve had to re-do one before. The only trick is to pay attention to indexing the lever so the operating rod is not too angular.
 
You must log in or register to reply here.

Similar threads

R
Farmall 504 PTO always on
Replies
13
Views
450
Janicholson
Janicholson
B
550 front PTO lever
Replies
7
Views
1K
BrotherJoe
B
Pete in MD
Model B Pushrod Tubes
Replies
3
Views
420
Pete in MD
Pete in MD
G
John deere 4020 LP Synchro trans PTO handle not functioning
Replies
6
Views
341
Fixingfarmer
Fixingfarmer
M
IH 350 U air filter and steering parts
Replies
4
Views
201
Janicholson
Janicholson
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top