Turning Crank on MD

Anonymous-0 · Dec 17, 2012

I purchased .030 rod and main bearings for my MD that I am rebuilding. I found .020 rod bearings, but could not find .020 for the mains, so I decided to go .030 for all. Now I am wondering if I did the right thing.

Janicholson · Dec 17, 2012

When finished, it will be fine and outlast your expectations (if not you) All is well. Jim

sflem849 · Dec 17, 2012

You or your great grandkids will never wear the rods and mains out again.

nosih · Dec 18, 2012

I have 0.020 mains in stock... Along with STD, 0.010, 0.030, and 0.060

sflem849 · Dec 18, 2012

(quoted from post at 01:05:49 12/18/12) I have 0.020 mains in stock... Along with STD, 0.010, 0.030, and 0.060

See, you still have one more rebuild after the .030s!

Turning Crank on MD

Anonymous-0

Well-known Member

Janicholson

Well-known Member

sflem849

Well-known Member

nosih

Member

sflem849

Well-known Member

Similar threads