Lookin for rings/pistons/sleeves for high serial number c135

RandyDowdy · Dec 14, 2012

I have an international 404 with the higher numbered c135 engine. I have found all parts except the rings and sleeves. I am considering just re-ringing the sleeves I have. I have checked the specs on the rings, and believe it or not, I can mix and match them from other engines, one ring at a time. Desperation is my name at this point! Here are the prices I have so far on the kit I'm putting together. (rings not available yet, but I have them listed with best the prices I've found.)

rod bearings $17 x 4 = $68
mains $104 x 1 Part Number: = $104

rings $20 x 4 = $80
oil pan gasket $10 x 1 = $10
head gasket set $41 x 1 = $41

Janicholson · Dec 14, 2012

The link is to Bates Corporation. They seem to have them, call, they seem friendly. Jim
Possible source.

El Toro · Dec 15, 2012

They have new sleeve kits available here on this forum for your tractor. Hal

nosih · Dec 15, 2012

I have NOS piston & Sleeve sets available for the
late C-135. I replied to your earlier post on 11-
19-2012 stating this as well.

nosih · Dec 15, 2012

here is a pic showing the differences in the early and late C-135 pistons

RandyDowdy · Dec 15, 2012

Thank you. I must have missed it!

RandyDowdy · Dec 15, 2012

Very big difference in the pistons! Are the rings the same? Are the rings available separately?

nosih · Dec 15, 2012

they can be sourced.

Randy Dowdy · Dec 21, 2012

My pistons for my IH 404 have a number of 375800R1, with CAM Z16 written under it. I have found 375800R2 pistons being discussed, but I cannot find anything anywhere about R1s at all. I even googled it, nada. The bore is 3.25, stock. All my pistons looked excellent, no signs of wear, no reason I won't re-ring this engine and put it right back together. Sleeves have a very thin ridge, much less than I would have expected. But does anyone recognize the 375800R1 piston number? Thank you.

Randy Dowdy · Dec 21, 2012

My pistons for my IH 404 have a number of 375800R1, with CAM Z16 written under it. I have found 375800R2 pistons being discussed, but I cannot find anything anywhere about R1s at all. I even googled it, nada. The bore is 3.25, stock. All my pistons looked excellent, no signs of wear, no reason I won't re-ring this engine and put it right back together. Sleeves have a very thin ridge, much less than I would have expected. But does anyone recognize the 375800R1 piston number? Thank you.

RandyDowdy · Dec 21, 2012

My pistons have the number 4095 on the side, like the one on the left above. So would it be the early or late? If you have access to that piston, mine has a number of 375800 R1 on top. Does yours? That number doesn't show up anywhere I have looked. 375800 R2 is listed as a 404 piston though. Any info you can give me on the 375800R1 is greatly appreciated.

Lookin for rings/pistons/sleeves for high serial number c135

RandyDowdy

Member

Janicholson

Well-known Member

El Toro

Well-known Member

nosih

Member

nosih

Member

RandyDowdy

Member

RandyDowdy

Member

nosih

Member

Randy Dowdy

New User

Randy Dowdy

New User

RandyDowdy

Member

Similar threads