Disc hillers for Super C

Dean Olson · Dec 9, 2012

I'm getting ready for my spring gardening. I want to get some disc hillers and need an opinion on what size disc and shank lengths for a Farmall Super C.

I plan to mount them in place of the cultivator shanks. Will that work?

I've never used them before so any insight would be great.

gene bender · Dec 10, 2012

They all work you mite need to move your present shanks higher as most dont have a long shank. I use them on two cults on the As and just adjust the long shanks up so the shovels are the same depth same would work on the C cult.

LMack · Dec 10, 2012

The original disk were about 13". They can be mounted in the same locations as cultivator shanks, the originals having the same size mounting shank rods. You can also mount them to the tool bars with wedge clamps. On an A or SA good row beds can be had by mounting the disk to the inside of the straight portion of the rear frames with wedge clamps.

gene bender · Dec 11, 2012

The A-134,A136,A-138 did not use the wedge clamps used the same as cults for the B,BN.

Disc hillers for Super C

Dean Olson

Well-known Member

gene bender

Well-known Member

LMack

Member

gene bender

Well-known Member

Similar threads