SH Carb problem

Hey guys! Tore down a SH carb to rebuild tonight and the idle metering jet (#23 in parts book) is broke off flush in the fuel bowl assembly. Any idea what the best way to get the threaded portion out? Tractor has been sitting for a long time and Im trying to get it running. Thanks!
 
Drill carefully (just the brass part) gradually enlarging the hole until the cast threads begin to show. Use a #5-40 thread tap from your favorite gunsmith and clean out the threads.
You MAY be able to carefully drive a small E-Z out or screwdriver in and back the broken part out.
Be sure to blow & solvent clean ALL passages b/4 re-assembly.
Good luck.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top