help on 584 lift cover removal

warrenWoodrow · Dec 7, 2012

Almost there. Does anyone know if the three larger bolts through the top middle of the cover have to be removed. There are several around the perimeter but three larger ones in center that have no other apparent purpose than to hold lift cover on. Also, would anyone know the torque pressure for both the perimeter and center bolts {assuming I do have to remove them } .

Jim Naden · Dec 7, 2012

(quoted from post at 18:08:48 12/07/12) Almost there. Does anyone know if the three larger bolts through the top middle of the cover have to be removed. There are several around the perimeter but three larger ones in center that have no other apparent purpose than to hold lift cover on. Also, would anyone know the torque pressure for both the perimeter and center bolts {assuming I do have to remove them } .

Just remove the bolts around the perimeter. There are no bolts in the middle that fasten the cover to the rear frame.

Anonymous-0 · Dec 7, 2012

Thanks.Hopefully I can get it of in the morning and retrieve the pto idler shaft gear which has the outer remnants of the old needle bearing race inside and put new bearing in .

help on 584 lift cover removal

warrenWoodrow

Member

Jim Naden

Member

Anonymous-0

Well-known Member

Similar threads