461 cultivator

Loren in WI · Nov 30, 2012

What size tractor was the 461 put on ussually?

Heat Houser · Nov 30, 2012

Had one on our 560. Straight frame 461s were on 350-450, bent frames on 460-560. The mounting "hinge" pin bore was cast into the front bolster on the 300-350 etc.
The 460-560 used some blocks that bolted thru the frame rail into the bolster hence it needed a bent frame. I have the mounting blocks, just need a cultivator...

gene bender · Dec 1, 2012

Lots were also used on the Ms you did need a bracket on the frame then cut the 461 and welded a mount so it fit.

Mitch D · Dec 1, 2012

Our choices for what it fit are either an 806 or a 240 as those were the only tractors on the farm the culitvator came from. It is a "bent frame" that was done at home as the welds are not factory.

461 cultivator

Loren in WI

Member

Heat Houser

Member

gene bender

Well-known Member

Mitch D

Member

Similar threads