Author	[Modern View]
AKdually 11-28-2012 19:58:11 209.112.176.111 Report to Moderator	I got the outer ring off and the new tire and tube in. Not able to get the one piece outer ring back on. Pops off when I get about two feet from having it on. Any clue? [Reply]   [No Email]
AKdually 11-29-2012 10:34:28 209.112.176.30 Report to Moderator	Re: Farmall F-12 rear tire tube change? in reply to AKdually, 11-28-2012 19:58:11   Thanks for the replies. Have a few moreideas to try now. [Reply]  [No Email]
John M 11-29-2012 05:26:32 68.115.194.228 Report to Moderator	Re: Farmall F-12 rear tire tube change? in reply to AKdually, 11-28-2012 19:58:11   I assume you have the same rims I do on mine, I was able to pry on that little lock/clamp/whatever its called just enough to let the ring slip down far enough to get it on. [Reply]  [No Email]
mkirsch 11-29-2012 05:21:54 64.80.110.74 Report to Moderator	Re: Farmall F-12 rear tire tube change? in reply to AKdually, 11-28-2012 19:58:11   Try using some nylon ratchet straps to hold the ring in place while you work the last little bit onto the rim. When airing up, I would also use a locking air chuck, and control the air with the valve on the air compressor from as far away as possible, rather than stand there and hold the chuck. [Reply]  [No Email]
S2710 11-29-2012 04:22:10 98.143.227.89 Report to Moderator	Re: Farmall F-12 rear tire tube change? in reply to AKdually, 11-28-2012 19:58:11   I am sure you probely know this, but when you air up the tire make sure you protect yourself with chains around the tire if you don't have a tire cage. Bob [Reply]  [No Email]
oldiron29 11-29-2012 03:45:54 74.88.11.200 Report to Moderator	Re: Farmall F-12 rear tire tube change? in reply to AKdually, 11-28-2012 19:58:11   The rim groove and the ring groove must be clean of rust and paint build up for them to lock together. I find it best to lay wheel flat on ground and stand on top of ring so it does not pop out when I am working on it. oldiron29 [Reply]  [No Email]