450 diesel

dslfarmer · Nov 25, 2012

I have a 450check diesel that the starter isnt working on. I wanted to pull start it and get it moving, it ran out of fuel and now I cant get it to start after putting fuel in it. Anyone know or have any ideas. Thanks

El Toro · Nov 25, 2012

You probably need to bleed the air after running it out of fuel. Hal

rustred · Nov 25, 2012

yes, for sure need to bleed system. otherwise it will never start.
you need to start at the sediment bowl, but make sure the fuel is at least over top of filter level in tank.then bleed aux. filter or the rearward one.
then start engine and run on gas and bleed final filter or the front one.
then advance the throttle a bit and bleed injectors.
then flip to diesel and go to work.

sflem849 · Nov 25, 2012

(quoted from post at 08:51:06 11/25/12) yes, for sure need to bleed system. otherwise it will never start.
you need to start at the sediment bowl, but make sure the fuel is at least over top of filter level in tank.then bleed aux. filter or the rearward one.
then start engine and run on gas and bleed final filter or the front one.
then advance the throttle a bit and bleed injectors.
then flip to diesel and go to work.

All that times 2.

450 diesel

Our Phone System is Down!

Please use the Contact us Form

We are working to resolve the issue ASAP! Thanks for your patience!

dslfarmer

Member

El Toro

Well-known Member

rustred

Well-known Member

sflem849

Well-known Member

Similar threads