Author	[Modern View]
Larry Hardesty 11-20-2012 09:56:18 74.38.130.115 Report to Moderator	I just finished painting what I think is a C-200 Disk Plow. It has shown a lot of use. I replaced the bearing in the furrow wheel but I did not replace the scrapers, which are worn a lot. I doubt it will be used to plow with by me. [Reply]   [No Email]
Lmack 11-20-2012 17:39:53 24.131.58.167 Report to Moderator	Re: C-200 Disk Plow in reply to Larry Hardesty, 11-20-2012 09:56:18   I have one just like yours that was given to me. Mine has seen very little use. Disk plows were used on "New Ground" to cut roots and limbs left after the clearing process. A lot of land was cleared in the deep south in the coastal plain after the WWII. [Reply]  [No Email]
CNKS 11-20-2012 17:28:32 216.144.104.128 Report to Moderator	Re: C-200 Disk Plow in reply to Larry Hardesty, 11-20-2012 09:56:18   So what is your question? I used to use a 3 disk HM 150 (not fast hitch). If you need the scrapers it is too wet to plow. We never used any. The disks appear worn to me. Not much else to replace. It should work--but I don't know where you live, disk plows are used mostly in the south, very few in the midwest or farther north, as the ground is typically too wet. You need a happy medium as far as moisture to use one of those. [Reply]  [No Email]
Larry Hardesty 11-20-2012 17:44:41 74.38.130.115 Report to Moderator	Re: C-200 Disk Plow in reply to CNKS, 11-20-2012 17:28:32   No question, just sharing a picture. I purchased the plow while in living in Texas ten years or so ago. Never seen one in the Midwest, and now I know why. Thanks Larry [Reply]  [No Email]