Author	[Modern View]
Bob in NW Iowa 11-08-2012 12:49:58 74.42.103.186 Report to Moderator	Thanks to the help here I have established that the spool valve located in the hydraulic safety relief body needs replaced. It's the spool valve for the power steering. The problem I have is finding a part number for it. I think it is possible to get the replacement part if I can find the part number. Anyone have that part number? I have a Behlen power steering unit. [Reply]   [No Email]
pete 23 11-08-2012 17:15:20 74.32.238.2 Report to Moderator	Re: Factory power steering Farmall 400 in reply to Bob in NW Iowa, 11-08-2012 12:49:58   You have the correct part number and you will notice parts manuals says order entire valve assembly. I have replaced many of those spool over the years and did get one about 6 or 7 years ago. Some parts men will not look an further than that which is a mistake. I would try again. Or call Titan CASEIH at Watertown , S.Dak. and ask for Ed. No one else there will be of much help. He will be able to tell you if it is still available or not. I am betting it is. 1 800 658 5590 [Reply]  [No Email]
tractor vin 11-08-2012 14:56:24 70.138.7.174 Report to Moderator	Re: Factory power steering Farmall 400 in reply to Bob in NW Iowa, 11-08-2012 12:49:58   National › NE › Columbus › 68601 Hi Lo Equipment Inc 3804 23rd St Ste 1, Columbus, NE 68601 402-564-3415 [Reply]  [No Email]
farmallhal 11-08-2012 14:47:27 76.4.176.113 Report to Moderator	Re: Factory power steering Farmall 400 in reply to Bob in NW Iowa, 11-08-2012 12:49:58   Bob, I found a thread about this same issue in the Modern View dated Aug. 21,2010, by Spotted Horse and titled "Attn: Owen Aaland and/or D. Slater" along with some pictures which might be of help to you. Unfortunately, the thread doesn't provide a source for the part except possible fabrication by a machine shop. In that post part no. 372204R1 is called a flow divider valve. Hope this is of some help with your issues or understanding some trouble shooting techniques, Hal. [Reply]  [No Email]
CNKS 11-08-2012 12:53:18 216.144.104.128 Report to Moderator	Re: Factory power steering Farmall 400 in reply to Bob in NW Iowa, 11-08-2012 12:49:58   If it is factory steering, regardless of the brand it should be in the IH parts book. If you don't have one you can look it up in www.caseih.com [Reply]  [No Email]
Bob in NW Iowa 11-08-2012 14:26:17 74.42.103.186 Report to Moderator	Re: Factory power steering Farmall 400 in reply to CNKS, 11-08-2012 12:53:18   I did find a part number online but when I called the dealer they told me it wasn't available. 372204R1 is the number I found. [Reply]  [No Email]
CNKS 11-08-2012 18:12:50 216.144.104.128 Report to Moderator	Re: Factory power steering Farmall 400 in reply to Bob in NW Iowa, 11-08-2012 14:26:17   Quite possible, but ask your dealer to do a parts search. If he doesn't want to do it, call Carter and Gruenewald, they will, they found me a dealer in Canada (I'm in KS) once. Phone number is on www.cngco.com. [Reply]  [No Email]