Author	[Modern View]
Mark Poss 10-31-2012 16:49:41 173.25.60.148 Report to Moderator	I am looking to pull a #8 2 bottom plow with an F-20. I will put the draw bar into the slots to get it as low as it will go but it still will be a lot higher than the farmall H that i usually pull it with. Will this be okay or should I try to add something to lower it? Thanks, Mark. [Reply]   [No Email]
Earl-IL 11-01-2012 11:56:39 50.81.209.158 Report to Moderator	Re: Plowing with an F-20 in reply to Mark Poss, 10-31-2012 16:49:41   Height should be 17-19 inches for proper line of draft. [Reply]  [No Email]
Ron W 10-31-2012 20:53:15 24.247.83.82 Report to Moderator	Re: Plowing with an F-20 in reply to Mark Poss, 10-31-2012 16:49:41   Read Page 15 & 18 of the tractor plowing manual http://ia700409.us.archive.org/13/items/cu31924003310962/cu31924003310962.pdf [Reply]  [No Email]
rljgoss 11-01-2012 11:22:42 64.61.192.2 Report to Moderator	Re: Plowing with an F-20 in reply to Ron W, 10-31-2012 20:53:15   Wow.... thank you very much for posting this manual...I wish I would have had this weeks ago when I tried to plow with an F-20 for the first time. [Reply]  [No Email]
Mark Poss 10-31-2012 18:20:44 173.25.60.148 Report to Moderator	Re: Plowing with an F-20 in reply to Mark Poss, 10-31-2012 16:49:41   So the height of the draw bar doesnt matter? I knew I would have to hook toward the right to ride in the furrow properly. thanks for the input, Mark. [Reply]  [No Email]
Old-F20 10-31-2012 18:11:00 71.7.101.5 Report to Moderator	Re: Plowing with an F-20 in reply to Mark Poss, 10-31-2012 16:49:41   all my 20's and 30's have the drawbar support in the round solid mount hole on the top. i never put them in the long oval holes. i plow with a #8 just fine like this. keep in mind you will have to completely adjust your plow to pull behind an F-20 to make it work correctly if you've been using it behind an H so your draft is correct [Reply]  [No Email]