d282 parts

gaston ruiz · Oct 25, 2012

hi there.does anyone here have the parts to convert a d282 from a 706 to a 403 combine. like the flywheel,back plate,front plate and timing cover. called a couple places ,one doesn't have them and the other won't part out what they have. thanks in advance any help, gaston

ejr-IA. · Oct 25, 2012

Where are you located?I have the parts when I took a 301 diesel off a 403 and put in my 560.I think the back plate is different if gear drive or hydro.I have do some digging would have both.I am in exstream west centeral Iowa.

d282 · Oct 25, 2012

You will also need the combine oil pan and oil pump. If you are using a tractor block you will need to drill out the back plate mounting holes because if you screw bolts in they will tend to break. The hydraulic bracket is different as well. I converted my 403 last year and am happy. Make sure you have the pump turned up to run the correct RPMS. You can use the gas wiring harness for for everything on the diesel. Good Luck

gaston ruiz · Oct 26, 2012

i am in arizona, the 403 is gear driven. is a 1962. this is my email, [email protected] .give me a price for each part plus chiping. thanks gaston

d282 parts

gaston ruiz

Member

ejr-IA.

Member

d282

Member

gaston ruiz

Member

Similar threads