Odd-sized pto shaft

Hugh McKinney · Oct 22, 2012

I know that this isn't a Farmall question, but I don't know where else to post: I have an old Servis "stalk cutter" (like a bush-hog but it has wheels-pull behind) that has the square telescoping pto shaft/tube arrangement. I now have acquired another one just like it, except that it is missing the "female" (tubing) part that goes from the pto on my tractor (a 450 LP) and slips over the square shaft (on the stalk cutter). The problem? It is an odd size: 1.375 inches, aka 1 and 3/8 inches, inside diameter of the tubing. Of course, the shaft is 1.375 also, allowing some discrepency for telescoping fore and aft. Does anybody know where I can find one, or even just the 1.375 i.d. square tubing? Thanks.

mike1972chev · Oct 22, 2012

Isnt that a TSC/Farm And Country/Farm and Fleet/Rural King part they can get you?????

I will measure,but I thought our old King Cutter mower uses those????

gene bender · Oct 22, 2012

You didnt say how thick the wall is on the "FEMALE" tube. Either get a new solid piece or maybe even get a whole new driveshaft but a welding shop or machine shop can fix you up.

LMack · Oct 22, 2012

To replace the entire shaft is going to be your best out. . . unless you get real lucky. Servis was bought out by Rino in Texas so you might find something there. They still stock some of the parts for the old Servis mowers. I was able to get parts for an old Model 60 which was the first Model sold by Servis. FYI IH/Farmall was the dealership of choice for Servis mowers.

LMack · Oct 22, 2012

Rino does have a detailed parts catalog online. You might see what you can find from there.

Hugh McKinney · Oct 23, 2012

Thank you very much for that piece of info. It turns out that Rhino is now handled by the local CaseIH dealer, so that gives me a starting point. The question about wall thickness, I didn't have calipers with me this morning, but it appears to be about 1/6 inch in thickness. I did go to Tractor Supply and they didn't have anything in that size--1.375 inch i.d. Did someone have a King Cutter tube that they wanted to sell? Finally, that Model 60, is that the one with a 60 inch cut? If so, that's the one I've got! Thanks to all for the help.

Odd-sized pto shaft

Hugh McKinney

Member

mike1972chev

Well-known Member

gene bender

Well-known Member

LMack

Member

LMack

Member

Hugh McKinney

Member

Similar threads