F-20 hyd pump, kind??

JDnTN

Member
What brand is it and where might I find some pics as the lines on this are not original? Was it effective? The pump is located between the differential and bell housing. It is bolted to and driven from the diff (no shaft visible) and touches the bell housing. It is about 14" tall, 12" wide, 10" front to rear. The tractor is a 1938 model. Thanks for any info. JD
 
H belly pump with adapter plate. Same hyd. as an H so you can do just about anything an H can do.
The input shaft to tranny have a yoke that slids over you have to cut about a 1/2" off that yoke.
oldiron29
 
It's an M pump mounted to an adapter plate on the front of the transmission. Works fine but only when the clutch is engaged. I have one on one of my F20's with a front end loader.
 
Here are some pics
a86807.jpg

a86808.jpg

a86811.jpg

a86813.jpg

a86814.jpg

a86815.jpg
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top