C-200 Disk Plow

Larry Hardesty · Oct 17, 2012

I have started working on my C-200 Disk Plow. The bearings are probably bad on the trailing wheel (actually a disc). It will not turn. Any ideas how how to get the bearings out and where replacements might be.

Jim Becker · Oct 17, 2012

Take the cap off and I don't think you will find any surprises on how it was assembled.

The bearings and seal should be identical to the front wheel bearings on a Cub. They should be easy to find.

Larry Hardesty · Oct 17, 2012

Jim, Thanks. I took the cap off and have the bearings soaking with PB Blaster. I will take another look to see how it is comes apart. It did not seem obvious to me when I first looked at it. Good to know that bearings and seals are identical to front end of a Cub. I know what to ask for if I go to Case-IH for them.

Larry

C-200 Disk Plow

Larry Hardesty

Member

Jim Becker

Well-known Member

Larry Hardesty

Member

Similar threads