|
| |
| Farmall & IHC Tractors Discussion Forum |
Topic: super C hydrolics
[Return to Forum]
| Author |
[Modern View]
|
| blunted
10-15-2012 18:59:03
208.126.58.170
|
has any one worked on them and know how to adjust to there potenchial? the 2 levers dont want to move, and the main lever only brings it up about 6 inches. also the clutch grabs big time , but no sign of leeking oil. thanks
|
|
|
| mkirsch
10-16-2012 05:18:45
64.80.110.74
|
|
Re: super C hydrolics in reply to blunted, 10-15-2012 18:59:03
|
|
| What is "the main lever?"
What is "it" that comes up 6 inches?
On a Super C you typically have the two levers next to the throttle that control the Touch Control rockshafts. These are stuck, correct?
Optional on a Super C is a remote valve. Is that what you mean by "the main lever?"
Also optional on a Super C is the fast hitch. Is that the "it" that comes up 6 inches when you move "the main lever?"
You've got to help us help you. All we have are your words so you need to be as precise and descriptive as you can, unless you can post pictures.
|
|
|
| gene bender
10-16-2012 03:11:45
67.55.227.68
|
|
Re: super C hydrolics in reply to blunted, 10-15-2012 18:59:03
|
|
| You need to unhook the levers and get them free as they are rusted probably. Then with the controls unhooked you can move the controls on the unit to see if the system works. Have you checked the hy fluid and cleaned the screen. The guard over the lift levers is easily removed just snaps ove them.Sometimes they are bound up pretty good so patience.WD-40 ect can be used.
|
|
|
| Keith-OR
10-15-2012 22:03:12
208.65.217.6
|
|
Re: super C hydrolics in reply to blunted, 10-15-2012 18:59:03
|
|
| I'm at a lose here, my question is "What Clutch" in the hydraulic system on a Super C?????
|
|
|
| Keith-OR
10-15-2012 22:04:44
208.65.217.6
|
|
Re: super C hydrolics in reply to Keith-OR, 10-15-2012 22:03:12
|
|
| Oh, and I have the manual on the hydraulic system on the Super C if ya need any info..
|
|
|
| BoonvilleKid
10-15-2012 20:01:55
24.206.167.192
|
|
Re: super C hydrolics in reply to blunted, 10-15-2012 18:59:03
|
|
| Before you start any other repairs, remove the two rods from the touch-levers, remove the two "C" shaped covers over the levers and spray at least one-half can of Blaster or some other solvent into the lower portions of the levers housing. Don't stop until both levers work freely and without any resistance. Then, go to the next problem.
|
|
|
[Options]
[Printer Friendly]
[Return to Forum]
[Add a Reply]
| Same-Day Shipping! Most of our stocked parts ship the same day you order (M-F). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a Company you can trust and have generous return policies! Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ More Info ] |
Home
| Forums
Copyright © 1997-2013 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor Headquarters |
About this site - Yesterday's Tractors is your one-stop source for antique tractors. If you are interested in older tractors you've come to the right place! Join more than 275,000 other classic tractor enthusiasts from all over the globe. We have many resources for antique tractor enthusiasts available including photos, classified ads, more than 24 tractor discussion forums, a show guide, values, specs and much more. Bookmark this site and come back often. Thanks for stopping by! Feel free to use our feedback form to send us your comments, suggestions and ideas.
|
|
|
