1466 no pto no remotes hydraulic trouble

1349 · Oct 14, 2012

Steering brakes work fine but have no pto or remotes. How many pumps does this have and what do they run in common?

the tractor vet · Oct 14, 2012

There are a total of THREE pumps. One built into the PTo unit , your rear hitch pump and the MCV pump . So you say that you Do have steering brakes and T/A functions but nothing on the back end .That sorta leaves out the PTO input drive and pressure plate hub for now. Remove the three point top link plate and look in there you will see the main PTO drive shaft IF it is not submerged in five extra gallon of oil . See if it is turning. IF so then here are two things that may have happened all at the same time (1) is that the drive key on the hyd. pump for the hitch sheared off and (2) the tiny little pin that holds the PTO control valve sheared . IF the main shaft is not turning back there but the ft. part is that you can not see then you have a broken shaft before or after the rear bearing and if is broken before the rear bearing i would think you would here a god ahfull cklanging and banging in the mid section.

1349 · Oct 14, 2012

the three point works up/dn and no noise. I will tear into it this next weekend.

1466 no pto no remotes hydraulic trouble

1349

Member

the tractor vet

Well-known Member

1349

Member

Similar threads