having problems bleeding inter 784

Anonymous-0 · Oct 5, 2012

hi have replaced some fuel pipes and filter but having problems geting it started cant find a bleed screw on the injection pump it has had a electric pump fitted can any one offer any help please thank you kind regards grahame

JimB2 · Oct 5, 2012

Hi, only bleed screws on top of filters. If you have an electric fuel pump attached should be easy to bleed the air out of the filters. Then put the Stop/Start/Run level in Start position, throttle about 3/4 open and crank engine with starter for no more than 30 seconds at a time, then let starter cool off, try this a couple time, if no go then loosen a couple injector lines at the rear of the injection pump and try cranking engine again.

Hope this helps
JimB

having problems bleeding inter 784

Our Phone System is Down!

Please use the Contact us Form

We are working to resolve the issue ASAP! Thanks for your patience!

Anonymous-0

Well-known Member

JimB2

Well-known Member

Similar threads