farmall h shift lever

Anonymous-0 · Sep 26, 2012

The shift lever on my farmall H is broken does anyone have a picture of a good one so I can see what its supposed to look like? I found one on ebay but the pic isnt great and it looks the same as the one I havethanks in advance
keith

Janicholson · Sep 26, 2012

The lever can be seen in the caseih.com parts diagrams on line. The lever is a continuous metal shaft from the knob end to the shifting tip on the far end. there is a pivot rod that goes through the lower shaft, with a cup shaped spring loaded dust cover above that. There are several photos if Shifter Lever is put into the search box. (either here, or in parts and Pieces.) Jim

Zachary Hoyt · Sep 26, 2012

I have used ones for $10 plus postage if you would rather go that route.
Zach

David G · Sep 26, 2012

Stay away from ebay, buy one from someone here. I have gotten burned with good quality used parts on there.

Anonymous-0 · Sep 26, 2012

I was just looking for a picture i thought I could build it back up by welding it but I couldnt find a good pic I finally just decided to weld it and see what happened and it works!!!

sflem849 · Sep 27, 2012

(quoted from post at 20:48:54 09/26/12) I was just looking for a picture i thought I could build it back up by welding it but I couldnt find a good pic I finally just decided to weld it and see what happened and it works!!!

Then yours is not broke, just worn...

Anonymous-0 · Sep 27, 2012

yeah sorry it was just wor out but after welding it it works fine, I just wasent sure what it was supposed to look like
Keith

farmall h shift lever

Anonymous-0

Well-known Member

Janicholson

Well-known Member

Zachary Hoyt

Well-known Member

David G

Well-known Member

Anonymous-0

Well-known Member

sflem849

Well-known Member

Anonymous-0

Well-known Member

Similar threads