Hiilside hitch parts. Need brace,or dimensions. Super M

mike1972chev · Sep 25, 2012

Hey,

I bought a Hillside hitch adjustment lever awhile back (that was supposed to be complete!

,but it is missing the brace that is outlined in yellow in the photo.

Would anyone have JUST this rod?? If not,I think I can make it from from some round rod stock fairly easily.

What is the rod diameter and the hole to hole center measurements on this piece???

Alos,any "close up" photos will help me build one real close to what it looked like originally.(I cannot install the handle at this time to measure anything myself.)

rusticredacres · Sep 25, 2012

Hey Mike Dwayne Hansford here, I have a complete hillside hitch on my M on steel I plowed with last fall when you were there at Franklin Ind. I will look at it after while and get an idea on what you need or you can call me and I can tell you what you are missing. Phone is cell 317-512-0493.

jim warehime · Sep 25, 2012

The rod is made out of 1 inch round stock 28 inches from center hole to center hole the flat ends are 2 inches long.

Fullers Farmalls · Sep 25, 2012

I know that picture! That guy is great to deal with if thats the hitch you bought. I have one on my H and will post a few close up pics. Dimensions may be different and I don't remember them.

mike1972chev · Sep 26, 2012

BTW,The photo I just borrowed.It is NOT the guy I purchased the hitch from.

Fullers Farmalls · Sep 26, 2012

Ahh ok. I gotcha. But there is that picture. I believe the dimensions on that were something close to 27 1/2 inches.

Hiilside hitch parts. Need brace,or dimensions. Super M

mike1972chev

Well-known Member

rusticredacres

Member

jim warehime

Member

Fullers Farmalls

Member

mike1972chev

Well-known Member

Fullers Farmalls

Member

Similar threads