Farmall C Rockshaft Arm - Pins?

Keven McNeice · Sep 23, 2012

From the looks of the parts available online, not many people lose all the parts for the Rockshaft arms on their Farmall"s.

I have 4 rockshaft arms, but no pins for them. I bought the tractor with 2 broken arms and the other two used bolts to hold onto the front scraper blade mount since there was room.

I have seen Clevis pins available, but nothing to hold them in place. I can"t use bolts due to lack of clearance between the two arms since I replaced the broken ones. I am wondering if parts still exist for the arms. You can see the stuff I am talking about in the picture for this ebay post:

http://www.ebay.com/itm/ORIGINAL-FARMALL-C-OUTER-HYDRAULIC-ROCKSHAFT-ARM-SC-2-27-12-/380415577742?pt=LH_DefaultDomain_0&hash=item5892890e8e

Thanks in advance for any advice or help

gene bender · Sep 23, 2012

You can make those pins out of a bolt. Cut off the end for correct length. Now chuck the end in your drill press and turn on the drill and use a grinder to shape the head round and thin enough for clearence. You can make the holders with a piece of metal and the pin that holds them. I can make them if you want.

WellWorn · Sep 23, 2012

The pins and keeper plate (along with the spring and pivot pin), are still available from Case/IH. I think I paid about $6 for the plate from my local dealer. The rockshaft pins I had made up in a local machine shop - 10 of them for $20, and they're spittin' image of the originals.

Keven McNeice · Oct 3, 2012

I ordered everything but the 8 pins, since it was
getting pretty expensive ($140...) I will probably
make the rockshaft pins myself as well, but thanks
for letting me know.

Thanks again guys,
Keven

Farmall C Rockshaft Arm - Pins?

Keven McNeice

New User

gene bender

Well-known Member

WellWorn

Member

Keven McNeice

New User

Similar threads