axle splines

34gpa · Sep 19, 2012

Friend asked me to order some brakes for his H,he told me 24 spline. I only show 10 or 12 in my parts book. This is his first tractor, could he of counted wrong.Me,I only do JD,so no help either. Thanks

D Slater · Sep 19, 2012

Sounds like he has the disc brake package that could be purchased to take the place of the band brakes. It will show the discs in a last print H parts book or maybe the on line parts lookup.
May have to get a brake shop to reline his discs or cut the lining so that he can install on the discs.

Janicholson · Sep 19, 2012

D Slater is on the track. Osco-Lambert disc brakes were dealer (or aftermarket, farmer) installed. THey will say Osco-Lambert, and have three retaining bolts to the housing. (probably can find replacement discs, but pricy. The IH discs have far fewer splines. Jim

rustyfarmall · Sep 19, 2012

(quoted from post at 12:00:39 09/19/12) Friend asked me to order some brakes for his H,he told me 24 spline. I only show 10 or 12 in my parts book. This is his first tractor, could he of counted wrong.Me,I only do JD,so no help either. Thanks

If indeed they are the Ausco-Lambert brakes, the best thing you can do is remove them completely and re-install the original band brakes. Far as I know, there are no parts available for the Ausco-Lambert brakes.

Haas · Sep 19, 2012

I have an MD with the Lambert brakes. I took the discs to the local Clutch/brake shop and they relined the disks for me. That was 10 years ago and they still work. I took the actuators apart and cleaned everything up when I had them apart. At that time, IH still had the parts, but they were pricy. As I recall, one disk was going to cost as much as it did to get all four of them relined.

axle splines

34gpa

Member

D Slater

Well-known Member

Janicholson

Well-known Member

rustyfarmall

Well-known Member

Haas

Well-known Member

Similar threads