Super C Fast Hitch

Anonymous-0 · Sep 17, 2012

Can the remote valve be re built easily.
Mine lifts fine but implement creeps down rather quickly .
I think the oil is not being held by the renote valve or does it have a check valve?

Does any one have a break down drawing of the valve or know where I can get a drawing of it.

mkirsch · Sep 17, 2012

There isn't much to it. The only moving part you can't see is the spool itself. Take it apart, replace the orings, seals, and gaskets, put it back together.

You can see a parts breakdown on caseIH . com, and get the parts from your favorite CaseIH dealer.

Janicholson · Sep 17, 2012

With the hitch held up with an extended floor jack (about 1/2 way). Take all hydraulic pressure off of the cylinder, and disconnect the lift hose. Cap it, and plug the port. Now lower the jack to allow pressure on the cylinder. if it goes down now, the cylinder is bypassing the piston. If it stays, the valve is probably bypassing. Jim

RTR · Sep 17, 2012

I believe there is a check valve under or around the seat/toolbox area.

Super C Fast Hitch

Our Phone System is Down!

Please use the Contact us Form

We are working to resolve the issue ASAP! Thanks for your patience!

Anonymous-0

Well-known Member

mkirsch

Well-known Member

Janicholson

Well-known Member

RTR

Well-known Member

Similar threads