Update on H belly pump coupler

Anonymous-0 · Sep 15, 2012

Thought I would try getting it off "one more time" and had success, but not with any of the traditional methods. FWIW, i took a 20" piece of angle iron, put it in the slot on the coupler, and put a little hydraulic jack between the angle iron and the two short pipes that connect to the pump. After giving it slow, steady pressure, it popped loose. All good now. Thanks for all responses.

Janicholson · Sep 15, 2012

Innovation is often dramatically successful. Jim

The Red · Sep 15, 2012

I used a pipe wrench on one stubborn one. Then ground off the teeth marks with the grinding stone on the shopsmith.

Anonymous-0 · Sep 15, 2012

Thanks, Jim, it does seem to be that. I just wish the idea had come to me first instead of last.

Update on H belly pump coupler

Anonymous-0

Well-known Member

Janicholson

Well-known Member

The Red

Well-known Member

Anonymous-0

Well-known Member

Similar threads