Farmall 560 brake cover

MartinD · Sep 8, 2012

Putting new brakes on the 560. Should the cover just go right back on, or is there a trick to doing this?

Fullers Farmalls · Sep 8, 2012

Believe they are the same as the Super M. make sure you're bolt for the discs is sticking out of the opening and one bolt is longer then some of the others. It is hard to get the splines lined up on the discs but it does go on. Others will correct me if i'm wrong.

Janicholson · Sep 8, 2012

Be sure the total thickness of the stack of disks and the expander are only about .030 to .040" less than the depth of the cover. Have the cover mount surfaces milled to meet this spec. Jim

mkirsch · Sep 8, 2012

Yeah, the cover should just go right back on.

pete 23 · Sep 9, 2012

It is difficult to get that outer disc onto the splined shaft, so I knock out the center plug so I can see the disc when installing cover.

Farmall 560 brake cover

MartinD

Member

Fullers Farmalls

Member

Janicholson

Well-known Member

mkirsch

Well-known Member

pete 23

Well-known Member

Similar threads