(800) 853-2651
SHOP NOW

pto engaged

Our Phone System is Down!

Please use the Contact us Form

We are working to resolve the issue ASAP! Thanks for your patience!

A

Anonymous-0

Well-known Member
464 IH pto engages put the lever does not go all the way forward to stay there.
I have to hold in place with a piece of wood, I can see where the shaft goes under the seat, and where the fork will lift the to engage the pto.
What do I take apart to make the shaft engage all the way?
 
Hi, common problem on 74 series tractors, especially if they are not kept undercover. The moisture gets in the lever actuating mechanism.
Use your favorite penetrating oil and lube everything while moving the pto lever back and forth. Also there is a rubber boot on top of the MCV valve that you may have to lift and spray oil on the pto actuating valve.

All the above only applies if no one has attempted to adjust the pto lever or there is no obstruction has fallen down in behind the seat or the sheet metal on the right side has not been bent.

Jimb
 
Thanks much, I will go give it a shot of PB Blaster, no obstruction, did not work right after winter, so this is probably the cause
 
You must log in or register to reply here.

Similar threads

D
Ford 4000 PTO Wont Engage
Replies
10
Views
683
Dwilshire
D
R
Farmall 504 PTO always on
Replies
13
Views
488
Janicholson
Janicholson
X
340 International Industrial PTO Problems
Replies
1
Views
237
Janicholson
Janicholson
P
Trouble diagnosing hydraulic issue
Replies
8
Views
493
rustred
rustred
J
Massey 1105 disengages
Replies
0
Views
153
jwrogers
J
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top