Cultivator Peice?? What is it??

RTR · Sep 1, 2012

I picked this peice up recently with some other cultivating stuff for a Super A and Cub Tractor. What is this peice, and what does it fit?? You can clearly see the IH part number in the photos along with the "IH" stamp to the left, and a circle with a "+" in it, to the right.

Never have seen a peice like this and would like to know more about it. In the meantime, I will try looking up the number in the CASE/IH parts site. THANKS!

d282 · Sep 1, 2012

It is the part of a cultivator that has the gague wheel and
shank. The shank fits into the square hole and the gague
wheel is held on with a bracket that uses the two holes up front.
Go to the caseih website and look up cultivators in the parts
book section.

RTR · Sep 1, 2012

That is how I just looked it up. From what I saw, it fits a 4 row to 6 row cultivator. What tractor would this fit on though. Does anyone happen to have a picture of this same bar/clamp setup?? The part number I have is really for the clamp only, and is making the search a little more difficult. THANKS GUYS>

DeltaRed · Sep 1, 2012

Its a 'tool holder'.Pretty common on older IH
cultivators.May even fit your cultivator.Keep it.Do
NOT throw it away!!

RTR · Sep 1, 2012

(quoted from post at 18:59:51 09/01/12) Its a 'tool holder'.Pretty common on older IH
cultivators.May even fit your cultivator.Keep it.Do
NOT throw it away!!

Oh, I not going to throw it away...don't worry.

I just can't imagine how it would be used and hooked up on a cultivator. I only work on and garden with the 1 row Cub, Super A, 100, 130, and 140 tractors. If I new HOW it hooked up and WHAT it fit, then I'd be happy.

Jim Becker · Sep 1, 2012

Scroll down to the side shot of the Fast-Hitch cultivator. Look at the second tool bar in from the foreground of the picture. The small square hole in your bracket holds the shield. The rest is probably clear enough from the picture.
http://www.chatstractors.com/051080_350u_plus_equip.htm

RTR · Sep 1, 2012

(quoted from post at 06:01:55 09/02/12) Scroll down to the side shot of the Fast-Hitch cultivator. Look at the second tool bar in from the foreground of the picture. The small square hole in your bracket holds the shield. The rest is probably clear enough from the picture.
http://www.chatstractors.com/051080_350u_plus_equip.htm

Thanks Jim!

Anonymous-0 · Sep 2, 2012

It fits a 455 IH front mount cultivator for one example, very common in the late 50/early 60 in midwest for M/450/560.

Cultivator Peice?? What is it??

RTR

Well-known Member

d282

Member

RTR

Well-known Member

DeltaRed

Well-known Member

RTR

Well-known Member

Jim Becker

Well-known Member

RTR

Well-known Member

Anonymous-0

Well-known Member

Similar threads