Super C chisel

Achodges1 · Aug 31, 2012

I am putting together a fast hitch mounted chisel plow. Will be pulling it with either a super C or 230. Soil is black clay. How many points do you think it will pull?

teddy52food · Aug 31, 2012

Maybe one if you don't go too deep.

the tractor vet · Aug 31, 2012

Depending on point size two to three with duals Now if your talking DMI tiger points the answer is O

Roger Tomfohrde · Aug 31, 2012

One and not very deep. It took a 560 to pull the one my cousin had in clay 10 inches deep 2-3 mph.Depends on how much hard pan you have.

sflem849 · Aug 31, 2012

Out west chisel plow or a real one like Illinois farmers use.

rustyfarmall · Aug 31, 2012

(quoted from post at 05:20:46 08/31/12) I am putting together a fast hitch mounted chisel plow. Will be pulling it with either a super C or 230. Soil is black clay. How many points do you think it will pull?

Figure on only 1 point per 10 horsepower. If you run dual rear tires, you may be able to add 1 more point.

Achodges1 · Sep 4, 2012

Thanks for the input. I have heard the one per horspower before,guess I'll start there.

IH fan · Sep 4, 2012

(quoted from post at 08:11:01 09/04/12) Thanks for the input. I have heard the one per horspower before,guess I'll start there.

Hope you meant 1 per [b:2992d0c974]10[/b:2992d0c974] hp. There are two types of chisels around here. One works about 8" deep and the other you can really bury, maybe 12 to 14". The company I worked for, when we were developing an electronic draft control, had a 7040 Allis and they bought a 7 shank of the deep draft kind... ended up pulling shanks 2 off. I recall pulling a 12 shank Graham-Hoeme of the shallower kind behind an 820 JD.

Super C chisel

Achodges1

Member

teddy52food

Well-known Member

the tractor vet

Well-known Member

Roger Tomfohrde

Member

sflem849

Well-known Member

rustyfarmall

Well-known Member

Achodges1

Member

IH fan

Well-known Member

Similar threads