c wide front

Indiana George · Aug 30, 2012

I am replacing my narrow front end, with a wide front on my C.Can anyone tell me what size are the bolts , that hold the axle into the steering gear housing assembly?
Thanks George

erik dekeyser · Aug 30, 2012

Dont throw or give away the narrow front because you might not like driving it with the wide front end. I did that once and about a year later got rid of the wide front,it was just to hard to steer. Erik..

LMack · Aug 30, 2012

I would suggest you go to the CIH web site for parts and look it up. I changed one out on a 200 for years for planting and switched it back for the rest of the year. Seems like the DOT bolts were 1/2" course thread and about 1 3/4" long with a lock washer but don't hold me to that. I agree that you will not like the way it drives. It will make a man out of you if you have to do much with it.

uncle henry · Aug 30, 2012

i used the same bolts but i went wide to narrow but i did keep the wide front

Harold H · Aug 31, 2012

I believe you will like the tricycle front better than the wide, but it is your choice.

Harold H

Anonymous-0 · Aug 31, 2012

I have a wide front on my 54 Super C,its a beautiful tractor. Its a little difficult to manuver around when working my large garden.If its going to be a restored-show tractor put the wide front on it. If you are going to use it alot- keep the narrow front.

c wide front

Indiana George

Member

erik dekeyser

Member

LMack

Member

uncle henry

Member

Harold H

Well-known Member

Anonymous-0

Well-known Member

Similar threads