Author	[Modern View]
Chuck Boehlke 08-21-2012 16:17:49 166.249.131.211 Report to Moderator	Looking for the throw away points for an IH 3 bottom trailing clutch lift plow. [Reply]   [No Email]
Ol' Gimpy 08-24-2012 16:43:37 74.67.127.235 Report to Moderator	Re: IH 3 bottom trailing plow points needed in reply to Chuck Boehlke, 08-21-2012 16:17:49   Have to have numbers,as so many different plow "Bottoms" offered by IH.Could be cast,chilled,steel,or fitted with "Plow Chief" or even converted to "Super Chief" bottoms.Share numbers are on the back side,or in a pinch could identify with moldboard numbers to determine series.   [Reply]  [No Email]
robgIN 08-22-2012 09:32:35 76.208.5.124 Report to Moderator	Re: IH 3 bottom trailing plow points needed in reply to Chuck Boehlke, 08-21-2012 16:17:49   sounds like you have plow chief bottoms ? those had the spear points . they are reproduced and seen occasionally on ebay and at tractor shows by vendors. Someone on here might have access to them, but you need to know what you have and need, pics help a lot when you are unsure.   [Reply]  [No Email]
mkirsch 08-22-2012 05:49:23 64.80.110.75 Report to Moderator	Re: IH 3 bottom trailing plow points needed in reply to Chuck Boehlke, 08-21-2012 16:17:49   You need to be more specific than that about the plow, and more importantly, about the BOTTOMS. The plow could have any of a dozen or more different styles of plow bottom on it, depending on the type of soil in your area, and the age of the plow. Your answers will range from, "No longer available anywhere," to, "Visit your local CaseIH dealer," depending on what you have. A picture of the plow bottom would be very helpful. You can post it in the "Help Identify" gallery on the left, and let us know.   [Reply]  [No Email]
Earl-IL 08-21-2012 17:20:06 173.23.198.181 Report to Moderator	Re: IH 3 bottom trailing plow points needed in reply to Chuck Boehlke, 08-21-2012 16:17:49   Spear point or blacksmith type share? 14--16in btm.   [Reply]  [No Email]