M Flywheel removal

BigTone · Aug 19, 2012

I got the motor out, pressure plate and clutch disk removed, I got the tabs on the bolts bent back and the bolts removed and the flywheel (im pretty sure its the flywheel, the ring gear is attached to it) will not come off....

How do I get it off, do I need a puller or am I missing somthing? Thanks for the help

the tractor vet · Aug 19, 2012

YEa your missing two guied studs installed to slide it out so you can grab it as it is STCU on the flange of the crank and a dowel Ya need one if not TWO pry bars and it will come off that is why i said ya need two guide studs so it will not pop off and take your toes off when it falls on them.

Nebraska Cowman · Aug 19, 2012

Yeah, it's stuck on the guide pin. I'd tunk it with a BFH. It will fall off. (maybe not a good idea if you are working very far off the ground)

M Flywheel removal

BigTone

Member

the tractor vet

Well-known Member

Nebraska Cowman

Well-known Member

Similar threads