smd-ta hyd.

william nickles · Aug 14, 2012

Having trouble with the Hyd. remote on my smd-ta, It has power steering with the priorty valve setup. The steering works perfectly but the remote will not pickup my implements. Could it be the relief valve in the tank or the priorty valve not set on the correct pressure?

D Slater · Aug 14, 2012

Does it have the remote control valve for 2 way hydraulics or just the liftall unit under the fuel tank?

the tractor vet · Aug 15, 2012

Have you plugged a gauge into the remotes to see what pressure you have there Ya only need three gallon a min. for steering . What implements are you trying to raise and what size cylinders are you using . Your working with a low pressure system and a tractor that is old . Plus the fact that that SM/TA diesel has more then likely had extensive field testing thru it's life and your problems may be due to a plum slap wore out pump .

william nickles · Aug 19, 2012

It has the 2 way valve. Had it hooked to a hyd lift hay tedder would not pick it up.

smd-ta hyd.

william nickles

New User

D Slater

Well-known Member

the tractor vet

Well-known Member

william nickles

New User

Similar threads