Hey guys needing a little help here. Found the cause of my
SMTA steering problems. The upper bolster steering shaft
was actually bent just below the splines that hold the sector
gear causing it to bind when turned to the right. It chewed up
the bushings pretty bad. I have a new shaft and got the new
bushings but I'm having trouble removing the old ones. I
already have the bent shaft out. Any tricks or advice to
getting these stubborn ol gals out? Thanks! DK
SMTA steering problems. The upper bolster steering shaft
was actually bent just below the splines that hold the sector
gear causing it to bind when turned to the right. It chewed up
the bushings pretty bad. I have a new shaft and got the new
bushings but I'm having trouble removing the old ones. I
already have the bent shaft out. Any tricks or advice to
getting these stubborn ol gals out? Thanks! DK