300 Row crop with no hydraulics

Va Gasman

Member
I am looking at a 300 that does not have hydraulic components under the fuel tank. The picture I got shows an open area under the sediment bowl. But another picture shows that it has the Pump in place upstream of distributor.
What would be the cost to get the hydraulics back in place? Has traditional flat drawbar with IH hitch plate attached
 
The hydraulics are not under the sediment bowl on a 300 row crop.

The valves are up under the hood, in front of the instrument cluster.

The reservoir is the base of the steering pedestal.

Look carefully for hydraulic lines running from the pump back along the engine, up the rear of the engine, and disappearing under the hood.

If there are no hydraulic lines, the pump is probably burned up from running dry. That's $800+ right there.

If the rest of the parts are also missing, your only choice is to go to a salvage yard and cannibalize them off another 300. Then you're at the mercy of the yard owner on price.
 
If it has a hydraulic pump mounted on the engine it probably has a hydraulic resevoir and at least one hydrauic valve. Can you spot a control handle to right of the instrument panel?
Without a belt pulley gear box there's more space under the tank.
 
Talked to the owner again today. He says it has one wet line at the back that he used on dick cylinder. Glad to learn this.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top