Farmall H front wheel

Randih · Aug 5, 2012

Are there any replacements for casting # 8274-da Front wheel center? Thanks.

Zachary Hoyt · Aug 5, 2012

I am not sure which one that is but I have a few hubs on hand from Hs, most if not all are the non-adjustable type with three wedges. I usually do them for $20.
Zach

CNKS · Aug 5, 2012

Best to give the model of the tractor since most of us don't have the numbers memorized. But your best bet is salvage. There are aftermarket rims, but far as I know no centers. Go to Wengers dot com, put in that number and you will find out whether Wengers has them and the price. Other sources are Bates Corp and Steel Wheel Ranch-785-548-7437. Mike will have most used parts.

Nebraska Cowman · Aug 5, 2012

I can generally find some good used ones without the holes worn much. Worn ones I throw on the cast iron pile. I took a couple off the H I put the steel on last month I think are OK.

D Slater · Aug 5, 2012

8274DB replaced it. Found on very late H and SH, 300, 350 tractors. Its made thicker where the rim mounting bolts holes are than the DA one.
Only matters if you want the same exact wheel. 8274DA shouldn't be hard to find. Used on thousands of H tractors. Can also be on IH M wide fronts made before 1954. Also some 4 series tractors.

Randih · Aug 5, 2012

Will an 8284DA work to replace the 8274DA?

Nebraska Cowman · Aug 6, 2012

Farmall H front wheel

Randih

New User

Zachary Hoyt

Well-known Member

CNKS

Well-known Member

Nebraska Cowman

Well-known Member

D Slater

Well-known Member

Randih

New User

Nebraska Cowman

Well-known Member

Similar threads