140 draft link length Still looking

Kevin Happke · Aug 5, 2012

Still looking for the length of the draft link from the center of the top hole to lowest hole, and also center to center on the two lower holes

Anonymous-0 · Aug 5, 2012

My dad has a 140 but i don"t know exactly what you are asking. If you"ll send me some clarification, i will try to help

Haas · Aug 5, 2012

I'm assuming you are talking about the piece that goes from the front rockshaft on the tractor to the bail on the one point fast hitch. I'll try to remember to go take a look at mine tomorrow and measure it. As I recall, the thing is not straight at the top end, but is offset so that it fits in the rockshaft arm properly and does not bind. I can also take a photo and send it to you.

erik dekeyser · Aug 5, 2012

Kevin im sorry i should have gotten back to you sooner but i thought you got that information long time ago. I measured mine and its 36 inches from one outside hole to the other and its inch and a quarter between holes. Hope that helps you if you need a picture just email me ok. Erik..

140 draft link length Still looking

Kevin Happke

Member

Anonymous-0

Well-known Member

Haas

Well-known Member

erik dekeyser

Member

Similar threads