Little wedges 350 Farmall

GordoSD · Jul 27, 2012

I was cleaning up the frame rails on my 350 Farmall, and I found one of these on each side in the grease. Are they to use in the motor mounts to get the rails to even with the front?
They have an IHCstamp and the number 51693..0 or D?

Owen Aaland · Jul 27, 2012

They are used on the inside of the frame for the bolts that hold the wide front to the frame rails.

GordoSD · Jul 27, 2012

As the Fonz would say, "exactamente." This 350 has a narrow front on it. Looks like PO swapped to NFE and never really drove it and those wedges were still there. Anyone want em? $1 plus shipping.

pete 23 · Jul 27, 2012

Those wedge's cost an arm and a leg at CaseIH but I found a bunch in Mac's hardware and they sell by the pound. Nothing really special about them as far as hardness. Seems most every tractor I work with wide front is missing some or all of them.

Patrick HMD · Jul 27, 2012

When I worked fabricating generator set skids at Steward & Stevenson many years ago, we referred to those as 'hillside washers'. Made from cast iron BTY.

Patrick

DeltaRed · Jul 28, 2012

How many ya got?

Little wedges 350 Farmall

GordoSD

Well-known Member

Owen Aaland

Well-known Member

GordoSD

Well-known Member

pete 23

Well-known Member

Patrick HMD

Member

DeltaRed

Well-known Member

Similar threads