184 a woods mower

Dan Croyle

New User
Hay all,new to the forum.I got an IH 184 a few weeks ago after wanting one of these little tractors for a long time.It is in pretty good shape and was gone over at the Dealer in 08,got the paperwork,really happy with it and it mows great,wich brings me to my question. It has a woods 59 Finnish deck and we kept the grass lower than I can get out of it.I have it adjusted as low as I can but was there off set blades you could use or a last resort shim the blades lower without damage to the spindle bearings. Thanks all. Dan
 
Dan--

I have a set of Gator high-suction blades that I took off my Cub 184 with woods LB59 deck soon after they were installed. They have about a 3/4" offset drop from mounting hole to blade tip. I took them off because they cut my grass too short and I didn't want to adjust the deck settings. I have a total of 4 blades, (3 for the set and one unused spare). I'd sell them cheap to you if you're interested. All 4 blades still have the factory cutting edge.
you can email me at [email protected] or call me at work 260-481-6524. I can send pics if you're interested. --Lee
 
Thanks. Lee, I will have to look at my blades before I get more.I am mowing about 1 1/2 inches now but coming off a wheel horse I was mowing at about an inch and would like to get that with this deck if I can. I do have to say it mows great. Thanks again, Dan
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top