Author	[Modern View]
jeffalex2 07-23-2012 05:03:26 173.166.171.89 Report to Moderator	I want to add a 3pt to the Super C so it can share implements with the 2N. Currently it has a fixed drawbar and working touch control with rock shafts. Is the kit sold here good? Thanks [Reply]   [No Email]
Dave_Id 07-23-2012 14:22:59 75.92.58.173 Report to Moderator	Re: Super C 3pt in reply to jeffalex2, 07-23-2012 05:03:26   Saginaw Tractor also has one for Super C. Very good unit. You will need to contact them for info on the Super C. Saginaw Tractor   [Reply]  [No Email]
CNKS 07-23-2012 14:22:36 216.144.104.128 Report to Moderator	Re: Super C 3pt in reply to jeffalex2, 07-23-2012 05:03:26   I haven't looked to see what brand this site sells. I'm a get what you pay for person. The best brand is Saginaw, last time I looked it was about $700 plus shipping. It is stronger than the tractor. In other words if you overload the 3 point the Super C will give up first. They are that good. They use a hyd cylinder, you don't want one that uses the rockshafts. They will sell you a modification "kit" that includes a bypass block and a valve to raise and lower it. You supply the hoses. You also need the factory clamps on the axle to bolt it to.   [Reply]  [No Email]
gene bender 07-23-2012 07:45:23 67.55.226.123 Report to Moderator	Re: Super C 3pt in reply to jeffalex2, 07-23-2012 05:03:26   You get hant you pay for. How much heavy work will you be using it for will depend on how strong of a unit you are willing to pay for. Some are much stronger than others.   [Reply]  [No Email]