Author	[Modern View]
colby64 07-20-2012 20:31:40 98.215.42.86 Report to Moderator	Ok guys we got some work done tonight.... Torque, pto, throttle, hyd levers are install, looks just amazing. Did get the dash in also. All the hood bolts look GREAT, chrome with fiber washer. You can see one on the center of the dash. Big plans tomorrow, finish setting valves, then we are putting on frame work the holds the fuel tank! Next will be all the electrical... It's really coming together... few little issues, but nothing too major. My new front wheel bolts I bought (and chromed) are wrong size, OPPS. So I'll send the original IH bolts to get chromed, and that is OK with ME! :) Don't worry there are SEVERAL little things that get changed in these photos... :) see more at http://colby560.shutterfly.com This post was edited by colby64 at 17:15:06 07/22/12. [Reply]   [No Email]
rhtx55 07-22-2012 18:14:11 207.119.61.184 Report to Moderator	Re: progress on the Colby560... dash, chrome levers, install in reply to colby64, 07-20-2012 20:31:40   Man that throttle lever is just begging for a chrome acorn nut !! [Reply]  [No Email]
colby64 07-22-2012 18:18:45 98.215.42.86 Report to Moderator	Re: progress on the Colby560... dash, chrome levers, install in reply to rhtx55, 07-22-2012 18:14:11   yes that will get changed :) chrome nut & flat washer. [Reply]  [No Email]
colby64 07-22-2012 18:18:45 98.215.42.86 Report to Moderator	Re: progress on the Colby560... dash, chrome levers, install in reply to rhtx55, 07-22-2012 18:14:11   yes that will get changed :) chrome nut & flat washer. [Reply]  [No Email]
colby64 07-22-2012 18:18:35 98.215.42.86 Report to Moderator	Re: progress on the Colby560... dash, chrome levers, install in reply to rhtx55, 07-22-2012 18:14:11   yes that will get changed :) chrome nut & flat washer. [Reply]  [No Email]
W.Brehm 07-22-2012 15:55:36 71.221.251.102 Report to Moderator	Re: progress on the Colby560... dash, chrome levers, install in reply to colby64, 07-20-2012 20:31:40   Colby, are you planning on placing a rubber mat down or something so the operator platform stays nice? [Reply]  [No Email]
colby64 07-22-2012 15:59:05 98.215.42.86 Report to Moderator	Re: progress on the Colby560... dash, chrome levers, install in reply to W.Brehm, 07-22-2012 15:55:36   W.Brehm said: (quoted from post at 15:55:36 07/22/12) Colby, are you planning on placing a rubber mat down or something so the operator platform stays nice? Yes, some type of custom floor mat. Have to do something to keep it nice though. YES PTO will get painted black, along with axles also. This post was edited by colby64 at 16:02:29 07/22/12. [Reply]  [No Email]
colby64 07-21-2012 13:41:47 98.215.42.86 Report to Moderator	Re: progress on the Colby560... dash, chrome levers, install in reply to colby64, 07-20-2012 20:31:40   more pictures from today's work (Saturday). Lots of more little details to complete, but going well! We could have it running this coming week even, few little things we need to install, optima battery & finish re-wiring electrical. Also not 100% sure of what to do with fuel line either yet. This post was edited by colby64 at 16:00:35 07/22/12 2 times. [Reply]  [No Email]
ejr-Ia. 07-22-2012 15:02:55 208.79.0.151 Report to Moderator	Re: progress on the Colby560... dash, chrome levers, install in reply to colby64, 07-21-2012 13:41:47   Need to paint the pto hand grip black. [Reply]  [No Email]
charles todd 07-20-2012 21:36:37 166.249.194.150 Report to Moderator	Re: progress on the Colby560... dash, chrome levers, install in reply to colby64, 07-20-2012 20:31:40   "Jaw drops"... Is this an IH/Harley? That is a lot of chrome1 SwEET! CT [Reply]  [No Email]