Farmall 544 C200

Rick MacGregor · Jul 13, 2012

What is the secret to removing the pulley from the water pump? There appears to be a cap that is maybe pressed on. Thanks!

pete 23 · Jul 13, 2012

If it has the welded to hub style pulley, it is just better to grab it with any kind of a puller or press that will get it off , or torch it. Then get a two piece pulley and hub. Just make sure you get same size pulley. All the older tractors , like 460 and 560 used the two piece. You have to get to get it off to get at snap ring to press bearing out if that is what you are after.

Rick MacGregor · Jul 16, 2012

It does not appear to be welded, but i'll take a closer look at it. Seems like someone else was trying to get it off by prying on the pulley; when it turns it has quite the wobble to it. What holds the two-piece pulley on?

Thanks!

Farmall 544 C200

Rick MacGregor

New User

pete 23

Well-known Member

Rick MacGregor

New User

Similar threads