pulling a ih 770 5/16 plow on land???? is it possible?

SkiDoojunky · Jul 9, 2012

Looking at a 5/16 770 pull plow that I would like to pull on land with an 806 wheatland, does anyone know if I can move the hitch enough to get the job done and still pull straight???

Thanks, Junky

Brendon-KS · Jul 9, 2012

Keep in mind that even if you get it set up to do this a narrow plow like this (relatively speaking) will pull harder on-land than in-furrow since there will be a lot of sideways force going into the landsides.

rustred · Jul 9, 2012

i pull 5/16 770 with my 660

rustred · Jul 9, 2012

couple more pic's

karl f · Jul 9, 2012

they do make a longer landside that takes 2 wear pads. It won't reduce the side draft, but it should lower the wear rate by distributing the pressure to a larger surface.

karl f

caterpillar guy · Jul 10, 2012

Should be able to. We used to pull 4-16's on land with a D-4 cat and an 830 case. Also pull 6-16's on land.

mkirsch · Jul 10, 2012

You've got nothing to lose by trying, right? I mean, you've already got the tractor, and you've already got the plow. It's an easy job to adjust the hitch, so if it doesn't work, you can always put it back right out in the field.

For the record, I think it'll work just fine.

pulling a ih 770 5/16 plow on land???? is it possible?

SkiDoojunky

Member

Brendon-KS

Well-known Member

rustred

Well-known Member

rustred

Well-known Member

karl f

Well-known Member

caterpillar guy

Well-known Member

mkirsch

Well-known Member

Similar threads