300u Axle Seals

slifnom · Jul 7, 2012

My 300 utility is leaking oil from the axle. Would it help to shoot more grease in the zert? I think not but had to ask!I forget is there an oil seal in there? Also a gasket between the metal?Thanks in advance

CNKS · Jul 7, 2012

Gasket and oil seal, may be a felt (dust) seal also. Grease may help but is not a permanent fix.

Anonymous-0 · Jul 7, 2012

I'ts not hard to replace seals/gaskets. Make sure you drain, draw down axle fluid, or elevate axle before you start. Remove wheel, unscrew hub bolt, remove hub, unscrew 4 bolts which hold cap to axle housing. Remove old seal (in cap), install new seal, replace gasket. I was able to cross the IH seal part # at NAPA for 1/2 the cost. Good Luck!

300u Axle Seals

slifnom

Member

CNKS

Well-known Member

Anonymous-0

Well-known Member

Similar threads