Colby 560 GETS PRIMER!!!! woo HOO

colby64

Member
ok....
Paint got removed this morning... owner of the shop said it cleaned up SUPER easy unlike most, very little effort.

sorry guys, but Im little excited!!! This tractor looks AMAZING!

They are going over frame rails & weights one more time... notice one is off in the photos below. Also that old hyd line gets removed before paint, we just left it on so it would keep any "stuff" out of the system :)

Tractor turns red tomorrow... then will sit for couple days as we are picking it up Saturday. Plan is to install rear wheels in the booth Sat AM before we start putting all the parts together.

YIPPIE!!!!!!

8837.jpg
8838.jpg
8839.jpg
8840.jpg
8841.jpg
8843.jpg
8844.jpg
 
It will be done by RPRU. I'm not worried.

Read Bermuda Ken's article in RPM and you are WAY ahead of schedule.
 
maybe.....

Last parts will be here next week :) few little chrome parts are on the way (hood bolts, shifter, throttle & hyd levers)

Other than we have EVERY part :) so I think, plan to double check everything this weekend to make sure.

Not making any promises, but we'll see :)
 
Yes..there is plenty of time to finish this. I think the 826 still had wet paint when I drove it to the show..... :)

I did pickup a McFarlane harrow once that had wet paint dripping from it when it was loaded. My 60-60 (60 mph for 60 minutes) paint dryer/truck worked great to cure it!!!
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top