super m

Anonymous-0 · Jun 26, 2012

Took off disc brake cover and cannot tell how to get to the inner seals.Brake pads removed and it seems there is a plate that has to come off, if so how do you remove it. Do you tap on it with a hammer and screwdriver or mabe a small chisel. The tractor is a 52 model.

Bob M · Jun 26, 2012

The backing plate is a tight slip fit into the tranny housing.

Look for 4 shallow slots spaced 90 deg around the OD of inside edge of the plate. (Note the slots will often be filled with dirt and hard to spot.) Use a screwdriver or a chisel in the slots to gradually pry the plate out.

Once it gets started the plate usually slips the rest of the way out with little difficulty.

sflem849 · Jun 26, 2012

(quoted from post at 18:50:31 06/26/12)... Use a screwdriver or a chisel in the slots to gradually pry the plate out...

or a couple PRY bars. :lol:

super m

Anonymous-0

Well-known Member

Bob M

Well-known Member

sflem849

Well-known Member

Similar threads