Help with stuck clutch on a Super A

Warspite · Jun 20, 2012

I'm afraid I already know the answer, but is there any way to get a stuck throw out bearing unstuck without splitting the tractor? I believe it's the original bearing (the tractor is a '52 model). I have greased the zerks and tried penetrating oil, but it's still very stuck. Any ideas?

old · Jun 20, 2012

If in fact it is the throw out bear pretty much junk if it is stuck and yep need to slit it and replace it

mkirsch · Jun 20, 2012

Well, what exactly is stuck? Is the clutch disk stuck to the flywheel, or the throwout bearing itself stuck?

Warspite · Jun 20, 2012

definitely the throw out bearing.

Jim Becker · Jun 20, 2012

Is it a graphite type bearing? They don't turn.

Warspite · Jun 20, 2012

It won't move forward or aft on the transmission shaft. I can see the release yoke slightly move when the clutch pedal is pressed, but the bearing won't move at all. If it makes any difference, the clutch pedal is stuck about half way through it's travel.

gene bender · Jun 21, 2012

u I had one like that once and sprayed wd-40 on the tube where the bearing slides. Using the clutch pedal finally got it to slide. Then greased the fitting now it works just fine.

Help with stuck clutch on a Super A

Warspite

New User

old

Well-known Member

mkirsch

Well-known Member

Warspite

New User

Jim Becker

Well-known Member

Warspite

New User

gene bender

Well-known Member

Similar threads