Anonymous-0
Well-known Member
i have a gomplets governer from a farmall h and is there any way to put it on my farmall h??? thanks
- Thread starter Anonymous-0
- Start date
Anonymous-0
Well-known Member
i mean i have a power governer from a farmall m,and i want to put it on a farmallh.sorry.
Pictures of IH and power gov. H and one M power gov tube and small levers. H and M governor upper housings. IH and H P.G. and M linkage.
All power governors are not alike but you probably have something like the pictures. Depends how much work you want to do. If you don't have the power governor tube and shaft to the carb. Little lever from the end of the M tube needs put on the H tube. Sometimes shortening the tube and shaft is needed to line up and sometimes a new pin hole drilled. Need H upper housing put on the M housing. Need shorter threaded rod to go between the heim joints. Need governor drive gear changed. Power governor rear weight shaft bushing is made for a smaller diameter shaft on some so the power gov. shaft needs to stay with its housing if so.
Top picture. (top- M- PG.)( middle- H- PG.) (bottom picture- IH- H)
Middle picture (left-M- PG) (middle- IH- H) (Right-H- PG )
Bottom picture ( left-M ) (Right - H )
All power governors are not alike but you probably have something like the pictures. Depends how much work you want to do. If you don't have the power governor tube and shaft to the carb. Little lever from the end of the M tube needs put on the H tube. Sometimes shortening the tube and shaft is needed to line up and sometimes a new pin hole drilled. Need H upper housing put on the M housing. Need shorter threaded rod to go between the heim joints. Need governor drive gear changed. Power governor rear weight shaft bushing is made for a smaller diameter shaft on some so the power gov. shaft needs to stay with its housing if so.
Top picture. (top- M- PG.)( middle- H- PG.) (bottom picture- IH- H)
Middle picture (left-M- PG) (middle- IH- H) (Right-H- PG )
Bottom picture ( left-M ) (Right - H )
Similar threads
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy